JakeDev - I WILL NOT CALL OR DM YOU converted this group to a supergroup
PumpPortalAPI converted a basic group to this supergroup «2X=10%»
IamNotaBULL invited IamNotaBULL
MonteChristo invited MonteChristo
IamNotaBULL removed IamNotaBULL
Deleted invited Deleted Account
JakeDev - I WILL NOT CALL OR DM YOU changed group photo
22:25
JakeDev - I WILL NOT CALL OR DM YOU
The PumpPortal API has launched in early alpha! Everything you need to get started can be found at
pumpportal.fun
JakeDev - I WILL NOT CALL OR DM YOU invited Safeguard
22:47
JakeDev - I WILL NOT CALL OR DM YOU
22:47
Safeguard
💫
Click the button below to setup your portalTo use previous setup, type /oldsetup
JakeDev - I WILL NOT CALL OR DM YOU removed Safeguard
JakeDev - I WILL NOT CALL OR DM YOU invited Rose
22:52
Rose
Welcome to Rose!
To make the most of my features, please make me admin. This will allow me to help you moderate your groups as effectively as possible!
Check out the help for more information on how best to protect your groups.
22:55
JakeDev - I WILL NOT CALL OR DM YOU
22:55
Rose
CAPTCHAs have been enabled. I will now mute people when they join.
The Crypto Cuscus invited The Crypto Cuscus
23:20
Rose
Hey there The Crypto Cuscus, and welcome to PumpPortalAPI! How are you?
23:26
The Crypto Cuscus
Nice api
23:26
Just using onchain data right?
23:28
JakeDev - I WILL NOT CALL OR DM YOU
Hey! Yes correct
23:29
Have you tried it out?
Coookie 🇵🇸(BTC 35k soon) invited Coookie 🇵🇸(BTC 35k soon)
00:14
Rose
Hey there Coookie 🇵🇸(Will dm you and find you) 🍪🫧, and welcome to PumpPortalAPI! How are you?
Expander invited Expander
20:26
Rose
Hey there 💎 Sky Hodlings, and welcome to PumpPortalAPI! How are you?
20:26
Expander
hi there guys
20:27
is this legit? sounds amazing
20:27
JakeDev - I WILL NOT CALL OR DM YOU
Hi welcome!
20:27
Expander
why do I need to connect a wallet to access data?
20:28
JakeDev - I WILL NOT CALL OR DM YOU
You create a wallet with PumpPortal, and then submit requests to trade with that wallet
20:28
Expander
Sounds good, how heavy can we go on this API?
20:28
JakeDev - I WILL NOT CALL OR DM YOU
You get the private key when you create the wallet so you can restore it, and move funds any time
20:29
Expander
cool, i m also guessing this is unofficial. Arent we at risk of getting blocked by them?
20:29
JakeDev - I WILL NOT CALL OR DM YOU
There are currently no rate limits, we are working on adding them right now as we see what scaling looks like
20:30
There should actually be no way to get blocked as we don't interact with pump fun's servers at all, trades are send direct to the chain
20:30
Expander
I am deploying a project to my team as we speak to build something around this. I hope the rules of the game dont change too much midway! =)
20:31
ohhh, thats super smart
20:31
you are just filtering by
pump.fun address involvement
20:31
JakeDev - I WILL NOT CALL OR DM YOU
Current endpoints should stay the same! We are currently working on more comprehensive documentation that will
20:32
If you try to trade anything that's not on pump the transaction will just fail
20:32
Expander
last question before we start trials, are you serious about this project? i m doing some investment on top of your structure.
20:33
JakeDev - I WILL NOT CALL OR DM YOU
Absolutely, we've been locked in on building this for around a month now, with plans far into the future
20:33
Expander
great. so the basic function here is to put trades, buy and sell.
cant we retrieve like news pairs and meta info on new tokens or something?
20:35
JakeDev - I WILL NOT CALL OR DM YOU
We have some endpoints for data like that, but they aren't public yet, we are still testing to get everything right. Although if you are experienced with solana there are several ways to get a lot of that data
20:36
amazing mate, crystal clear. I ll stick around in the group for now, if you come up with any plans for pricing, even if you just planning them, plz let me know so I can factor in my plans
20:38
JakeDev - I WILL NOT CALL OR DM YOU
Sure! We are planning on implementing small fees on buys only. Likely in the range of 0.5-1% We will announce in advance here and in the docs before the fees are implemented!
20:38
Expander
5 stars. thanks mate
20:40
JakeDev - I WILL NOT CALL OR DM YOU
Thanks for checking it out! If your project is public, I'd love to see what you're building once you have something up, Feel free to send it here!
👍
21:28
Expander
Bro, what if i need access to those pvt endpoints. Like today. We can come to a monetary arrangement. We can pay per request or something.
21:29
My team will take a day to build it, m trying to cut corners
21:36
JakeDev - I WILL NOT CALL OR DM YOU
It's looking like some will get released this wknd
21:36
But we want to do some final testing
21:37
The endpoint to subscribe to new coin creation events at least will be ready soon
21:38
Expander
Got it. Please keep me posted, thanks
21:40
Expander
oh cool. i ll forward that to the team, thanks a ton
👍
Deleted removed Deleted Account
04:17
Rose
Nice knowing you!
15:36
JakeDev - I WILL NOT CALL OR DM YOU
Heading into next week we are overhauling our documentation, and planning on opening up new endpoints to the public!
10:29
Rose
Hey there Branden, and welcome to PumpPortalAPI! How are you?
10:29
Hey there Branden, and welcome to PumpPortalAPI! How are you?
10:30
Branden
I'm good. Thank you.
15:34
Rose
Hey there D. Tanz, and welcome to PumpPortalAPI! How are you?
solboi0x invited solboi0x
19:37
Rose
Hey there AG, and welcome to PumpPortalAPI! How are you?
19:37
Hey there AG, and welcome to PumpPortalAPI! How are you?
19:38
solboi0x
Hey buddy! How do you guys store private keys? Is there a documentation or explainer on it? Thanks.
@JakeDevSol
19:44
JakeDev - I WILL NOT CALL OR DM YOU
Hey welcome! We actually don't store private keys on our servers. When you generate a wallet, the linked api key contains an encrypted private key. When you make a trade that key gets used to sign the transaction. We're re-writing our documentation at the moment, and adding a lot more detail about the process.
❤
21:27
solboi0x
Thanks for the reply. What encryption is being used for the private key?
21:38
JakeDev - I WILL NOT CALL OR DM YOU
AES256 🙂
16:29
Rose
Hey there Nimo, and welcome to PumpPortalAPI! How are you?
16:30
NEMO
Hey, is your API up and running?
16:38
JakeDev - I WILL NOT CALL OR DM YOU
Hi, yes our /api/trade endpoint is now available to the public!
16:48
NEMO
what's the fee you take per api call?
16:50
JakeDev - I WILL NOT CALL OR DM YOU
1% for buys, sells are free. We're working on documentation for our fee structure atm.
16:52
NEMO
Since we have to create tokenpairs on your website, I don't think anyone will trust this with large sums. Any way to make the api calls with my own keypairs?
16:55
JakeDev - I WILL NOT CALL OR DM YOU
Ah, no not at the moment. We don't store private keys, we decrypt the private key from your api key at the time of trade. But there's not a good way to prove that, so we are thinking about implementing another option.
17:09
NEMO
Looks like the api is down? I'm not getting any tx to go through and no error log either
17:14
JakeDev - I WILL NOT CALL OR DM YOU
Yeah, it is down right now, looking into it.
18:09
JakeDev - I WILL NOT CALL OR DM YOU
Sorry about that, should be working now
19:38
NEMO
Is it stable? Can I count this if I leave it running overnight?
19:41
JakeDev - I WILL NOT CALL OR DM YOU
Yeah, the behavior of the api will not change. Worst case scenario, like if pump upgrades their program, transactions will just fail until we see it and fix the issue.
19:51
NEMO
How do you interact with them btw? Just reverse engineered the ui instructions to recreate them programatically ?
19:53
JakeDev - I WILL NOT CALL OR DM YOU
Pretty much yes, lots of reverse engineering to get all the keys and data encoding right. We spent a lot of time staring at the minified js on the site lol.
🔥
21:20
NEMO
API down again?
21:27
JakeDev - I WILL NOT CALL OR DM YOU
I don't believe so
23:34
JakeDev - I WILL NOT CALL OR DM YOU
Big news all, today we are beginning to open up our Data API to the public! This will allow real-time streaming of pump-fun data, like trades and token creation.
Additionally, we have overhauled our documentation at
https://pumpportal.fun/ to explain our fee structure and all the new functionality. Documentation for the trading api is still available at
https://pumpportal.fun/trading-api/setup
IBOU Garba invited IBOU Garba
23:47
Rose
Hey there Afropto, and welcome to PumpPortalAPI! How are you?
23:48
Rose
Hey there Miro, and welcome to PumpPortalAPI! How are you?
Deleted invited Deleted Account
23:49
Rose
Hey there toly'cat, and welcome to PumpPortalAPI! How are you?
Deleted invited Deleted Account
23:50
Rose
Hey there Yun, and welcome to PumpPortalAPI! How are you?
23:50
Rose
Hey there VHP, and welcome to PumpPortalAPI! How are you?
23:50
Deleted Account
Why there is no link from website link to the pumpfun?
23:50
VHP
Cool project you guys got here
𓆏ࣩࣩࣩࣩࣩࣩࣩࣩࣩࣩࣩࣩࣩࣩࣩࣩࣩࣩࣩࣩࣩࣩࣩࣩࣩࣩࣩࣩ Chrollo ⸙ꠋꠋꠋꠋꠋꠋ𓃗 กิิิิิิิิิิิิิิิ 🦄 invited 𓆏ࣩࣩࣩࣩࣩࣩࣩࣩࣩࣩࣩࣩࣩࣩࣩࣩࣩࣩࣩࣩࣩࣩࣩࣩࣩࣩࣩࣩ Chrollo ⸙ꠋꠋꠋꠋꠋꠋ𓃗 กิิิิิิิิิิิิิิิ 🦄
23:50
Rose
Hey there Chrollo, and welcome to PumpPortalAPI! How are you?
23:50
Hey there THE TERMINATOR, and welcome to PumpPortalAPI! How are you?
23:50
Rose
Hey there Trey911🎟️, and welcome to PumpPortalAPI! How are you?
23:50
Rose
Hey there Iso, and welcome to PumpPortalAPI! How are you?
23:51
𓆏ࣩࣩࣩࣩࣩࣩࣩࣩࣩࣩࣩࣩࣩࣩࣩࣩࣩࣩࣩࣩࣩࣩࣩࣩࣩࣩࣩࣩ Chrollo ⸙ꠋꠋꠋꠋꠋꠋ𓃗 กิิิิิิิิิิิิิิิ 🦄
23:51
JakeDev - I WILL NOT CALL OR DM YOU
Hey everyone. PumpPortal does NOT have an official token at this time. Do not buy scams. Any launch will be announce here and on the website first.
❤
6
🤔
2
👍
🤣
1
23:51
Oof.
Yo this project is EPIC dude
23:51
Rose
Hey there Silver, and welcome to PumpPortalAPI! How are you?
23:51
Rose
Hey there TC 👨🏼🍳, and welcome to PumpPortalAPI! How are you?
23:51
VHP
pumpfun launch wasnt you?
Deleted invited Deleted Account
23:52
Rose
Hey there JeeterOfficial, and welcome to PumpPortalAPI! How are you?
goblinking (Gladiator ARC) invited goblinking (Gladiator ARC)
23:52
Rose
Hey there goblinking 🏅🏅, and welcome to PumpPortalAPI! How are you?
23:52
Deleted Account
was it u?
23:52
Rose
Hey there goblinking 🏅🏅, and welcome to PumpPortalAPI! How are you?
23:52
offline
It’s not bro
23:52
Deleted Account
lmaoooo
Deleted invited Deleted Account
23:52
Rose
Hey there Nicolas, and welcome to PumpPortalAPI! How are you?
23:52
JakeDev - I WILL NOT CALL OR DM YOU
Lol yeah do not buy that
Deleted removed Deleted Account
23:52
Rose
Nice knowing you!
23:52
Rose
Hey there SmiR NS [Never dm first], and welcome to PumpPortalAPI! How are you?
23:53
Amir
so ur building a pumpfun bot?
CrypticKing invited CrypticKing
23:53
Rose
Hey there CrypticKing, and welcome to PumpPortalAPI! How are you?
23:53
Hey there CrypticKing, and welcome to PumpPortalAPI! How are you?
23:53
Rose
Hey there Mushi, and welcome to PumpPortalAPI! How are you?
23:53
Hey there Mushi, and welcome to PumpPortalAPI! How are you?
23:53
VHP
I will be buying when you officially launch
Starwolf Ship Handler invited Starwolf Ship Handler
23:54
Rose
Hey there frycooknugget, and welcome to PumpPortalAPI! How are you?
23:54
Hey there frycooknugget, and welcome to PumpPortalAPI! How are you?
23:54
Starwolf Ship Handler
ayo
23:54
at least the scam is bringing ppl in here lmfao
23:57
JakeDev - I WILL NOT CALL OR DM YOU
Hello everyone. Sorry if you were brought here by a scam! We do NOT have a token at this time. We intend to launch a token in the future, but as of right now we are in the alpha testing stage and still ironing out all the kinks.
Our API is legit, and if you are a dev I would love for you to check it out
https://pumpportal.fun/
00:03
Deleted Account
现在接口可以调用了吗
00:03
Rose
Hey there cex bro, and welcome to PumpPortalAPI! How are you?
00:03
Hey there cex bro, and welcome to PumpPortalAPI! How are you?
Deleted invited Deleted Account
06:33
Rose
Hey there ƁŕAsŚ Çřypťò, and welcome to PumpPortalAPI! How are you?
Deleted removed Deleted Account
06:34
Rose
Nice knowing you!
IBOU Garba removed IBOU Garba
07:54
Rose
Nice knowing you!
gargantuanmonkeyman invited gargantuanmonkeyman
08:12
Rose
Hey there conan, and welcome to PumpPortalAPI! How are you?
Ccpurple invited Ccpurple
08:12
Rose
Hey there Ccpurple, and welcome to PumpPortalAPI! How are you?
08:12
gargantuanmonkeyman
did u launch
08:13
Rose
Hey there Jack Kahuna Laguna, and welcome to PumpPortalAPI! How are you?
08:14
Rose
Hey there PN, and welcome to PumpPortalAPI! How are you?
09:20
Rose
Hey there CrypTho
$SAC, and welcome to PumpPortalAPI! How are you?
rouble lu invited rouble lu
11:35
Rose
Hey there rouble, and welcome to PumpPortalAPI! How are you?
Deleted invited Deleted Account
11:51
Rose
Hey there ChromeHeartCatz, and welcome to PumpPortalAPI! How are you?
12:47
NEMO
@JakeDevSol feature request: Adding a message (reply on
pump.fun) with the transaction
13:21
Rose
Hey there Z, and welcome to PumpPortalAPI! How are you?
14:27
Rose
Hey there Lee, and welcome to PumpPortalAPI! How are you?
16:21
NEMO
Is there a rate limit to the api?
NullByte invited NullByte
17:34
Rose
Hey there NullByte, and welcome to PumpPortalAPI! How are you?
17:44
JakeDev - I WILL NOT CALL OR DM YOU
I do think that'd be useful, but afaik the messages are handled by pumps api, they don't get sent on chain. And at the moment we're focusing on what we can send direct to the chain.
17:44
You should be good staying under 5 requests per second
18:07
Rose
Hey there Josh, and welcome to PumpPortalAPI! How are you?
Bfjsjrbd invited Bfjsjrbd
18:38
Rose
Hey there Bfjsjrbd, and welcome to PumpPortalAPI! How are you?
18:59
Josh
is the data api route up?
19:00
JakeDev - I WILL NOT CALL OR DM YOU
Yes, all routes in the docs should be public 😁
19:03
Josh
the trading route works for me but not the data?
19:03
JakeDev - I WILL NOT CALL OR DM YOU
Hmm checking
19:05
Sorry, the docs are incorrect there, the correct route is /api/data/token-info
19:06
Will have that updated shortly
19:06
Rose
Nice knowing you!
19:08
Josh
Appreciate the help. I like how you have the real time route. Could it be possible in the future to have a route showing realtime data on a specific token. Like allowing you to see market cap live?
19:12
You will receive messages like this upon every transaction, with market cap in SOL
19:12
Josh
Oh that's amazing thanks
👍
Deleted invited Deleted Account
20:07
Rose
Hey there Homiecide, and welcome to PumpPortalAPI! How are you?
xuan (joyful july arc) invited xuan (joyful july arc)
22:10
Rose
Hey there Aevum, and welcome to PumpPortalAPI! How are you?
xuan (joyful july arc) removed xuan (joyful july arc)
22:10
Rose
Nice knowing you!
22:14
Rose
Hey there Wok, and welcome to PumpPortalAPI! How are you?
00:37
Rose
Hey there Linux, and welcome to PumpPortalAPI! How are you?
05:48
Rose
Hey there 🐍, and welcome to PumpPortalAPI! How are you?
11:11
Rose
Nice knowing you!
11:30
Rose
Nice knowing you!
13:27
Rose
Hey there SP, and welcome to PumpPortalAPI! How are you?
14:48
JakeDev - I WILL NOT CALL OR DM YOU
Jito tips are so high to get anything to go through today
14:49
Rolling out an option to specify tip amounts on the trade api soon
🔥
17:21
Rose
Hey there Ansem, and welcome to PumpPortalAPI! How are you?
18:21
NEMO
@JakeDevSol Is there a rate limit per IP or something like that? What happens if our app makes too many API calls?
18:24
Dund
Can we get an example for token info request?
18:30
anyone got the token info request to work? can't get it to work
18:32
JakeDev - I WILL NOT CALL OR DM YOU
Yes, for now it is limited to 5 requests per second
18:34
It's just a get request to the url, I can add an example to the docs soon
19:02
Dund
Yeah in browser works fine but when i do it in my script it doesn't work
19:03
Im just trying to automatically get token info for every new token thats launched, but im getting http 403 error which means server refused to authorize the request
19:23
Coookie 🇵🇸(BTC 35k soon)
Ansem
Deleted invited Deleted Account
20:14
Rose
Hey there wizard, and welcome to PumpPortalAPI! How are you?
Key Investment invited Key Investment
20:15
Rose
Hey there Key, and welcome to PumpPortalAPI! How are you?
20:15
Deleted Account
thank you for building this, very cool
😁
20:20
I have been testing this successfully performing 10x buy or sell sequentially with 3 second timeout between transaction submission. In some cases only 6/10 transactions post to pump fun successfully. Any insight?
20:22
occasionally receiving error:
transaction data: {
errors: [
'failed to send transaction: Transaction simulation failed: Error processing Instruction 2: Provided owner is not allowed'
]
}
Deleted invited Deleted Account
20:55
Rose
Hey there nooktown, and welcome to PumpPortalAPI! How are you?
Deleted removed Deleted Account
20:56
Rose
Nice knowing you!
21:01
JakeDev - I WILL NOT CALL OR DM YOU
Hmm, haven't seen this one yet, but I'll do some research
21:31
Nevermind. Looks like it has some weird lag time sometimes.. Some transactions go through in 1 sec, sometimes it takes like 3 minutes. I'm guessing it's more blockchain related?
21:32
JakeDev - I WILL NOT CALL OR DM YOU
Yeah, I'm seeing transactions take a long time to land as well, may just be Solana. Looking into it
👍
22:02
Rose
Hey there Bossy, and welcome to PumpPortalAPI! How are you?
22:02
Hey there Bossy, and welcome to PumpPortalAPI! How are you?
22:03
Rose
Nice knowing you!
JakeDev - I WILL NOT CALL OR DM YOU removed Deleted Account
22:06
Rose
Nice knowing you!
23:34
JakeDev - I WILL NOT CALL OR DM YOU
Ok I think we've improved transaction speeds somewhat. How quickly the API lands transactions is obviously crucial to users, so we're going to continue optimizing that as much as we can.
🔥
Dave 🦴 Jones invited Dave 🦴 Jones
00:15
Rose
Hey there Dave, and welcome to PumpPortalAPI! How are you?
00:21
Deleted Account
Is there additional documentation available? Repo for API?
catwifhat invited catwifhat
03:09
Rose
Hey there abc, and welcome to PumpPortalAPI! How are you?
03:11
catwifhat
If the purchase through API is successful, can the purchased quantity be returned?
Deleted invited Deleted Account
03:11
Rose
Hey there drag0n (🐈⬛️,🛵), and welcome to PumpPortalAPI! How are you?
03:57
catwifhat
Can you add a function to sell based on percentage?
Gallant Knight invited Gallant Knight
04:15
Rose
Hey there Gallant, and welcome to PumpPortalAPI! How are you?
Coollish invited Coollish
05:32
Rose
Hey there LKDM:, and welcome to PumpPortalAPI! How are you?
06:04
Rose
Hey there lin, and welcome to PumpPortalAPI! How are you?
06:05
Rose
Nice knowing you!
Deleted removed Deleted Account
06:17
Rose
Nice knowing you!
06:21
🐈
it you wanna collaborate with us at toekn that'd be fun!
06:21
we have approximately 100 new projects that sign up per day now
06:50
Josh
Every time you buy a token store the total amount held of the token and then you can just calculate the % and sell that amount
Cabro (Demon Arc) invited Cabro (Demon Arc)
11:34
Rose
Hey there Whale Watcher, and welcome to PumpPortalAPI! How are you?
hardavara invited hardavara
12:42
Rose
Hey there ccc, and welcome to PumpPortalAPI! How are you?
13:52
JakeDev - I WILL NOT CALL OR DM YOU
Looks like traffic on Pump is down somewhat today, probably cause of the market dip. If you build during the dips, you will have the infrastructure ready to make bank during the rips 😎
😎
13:57
Gallant Knight
Hello
13:57
How can I get new tokens information?
13:59
And you can use the subscribeNewToken method to get the token creation events as they happen
gargantuanmonkeyman removed gargantuanmonkeyman
14:06
Rose
Nice knowing you!
14:28
Cabro (Demon Arc)
Do i need to pay something to use the API?
15:07
Deleted Account
Any feature for handling token transition to raydium LP, or we roll our own?
15:16
JakeDev - I WILL NOT CALL OR DM YOU
The data api is free, and the trade api takes a 0.5% fee per trade.
https://pumpportal.fun/fees
15:17
Currently no, the api only supports trades on the Pump bonding curve
👍
15:21
Deleted Account
Hey thank you
Clouds𝟽𝟽𝟽 🎱 invited Clouds𝟽𝟽𝟽 🎱
15:56
Rose
Hey there Clouds, and welcome to PumpPortalAPI! How are you?
👍
morelife invited morelife
16:00
Rose
Hey there morelife, and welcome to PumpPortalAPI! How are you?
19:12
Rose
Hey there Eesa, and welcome to PumpPortalAPI! How are you?
00:31
Gallant Knight
How can I buy and sell using API on Blast?
00:47
Any possible for buying on blast chain?
02:00
Rose
Hey there nikimaru, and welcome to PumpPortalAPI! How are you?
07:04
Cabro (Demon Arc)
Can i use the data API to filter:
- Creation
- Market Cap
- Last Trade
- Replies
- Top Holders percentage
- Dev Holds
- Socials
- Bonding Curve Progress
- KOTH
?
08:51
Rose
Hey there devgen, and welcome to PumpPortalAPI! How are you?
09:56
JakeDev - I WILL NOT CALL OR DM YOU
Only solana sorry (does Pump even support blast anymore? It looks like they removed the Blast tab.)
10:06
You can get coin creation and trade events on the Websocket. And you can use that to keep track of some of that other data. Replies though are not on chain, so there's no way to get those from the API, as we use the chain as our single source of data.
10:08
Deleted Account
READ THE DOCS
👍
10:09
JakeDev - I WILL NOT CALL OR DM YOU
Not at the moment, no
10:14
Deleted Account
lmfao
🤣
10:14
catwifhat
Can Real-time Updates add an interface to obtain information about all coins created through the creator address?
10:16
Deleted Account
Most of these requests will need to be implemented through your own web3.js solution
👍
10:18
JakeDev - I WILL NOT CALL OR DM YOU
The coin creation events also contain the creators pubkey, so it should be pretty easy to do your own filtering based on that.
10:53
catwifhat
Do you mean to call the pump interface through pubkey to obtain all the coins created by the creator?
10:56
JakeDev - I WILL NOT CALL OR DM YOU
Oh yeah that might work for you, or you could pull the account's transactions from an RPC with something like web3.js
10:58
catwifhat
There will be a speed limit when calling the official interface of pump.
10:59
JakeDev - I WILL NOT CALL OR DM YOU
Personally I'd prefer to get everything I could from the chain, as pump's interface & api could go down or change
11:06
Deleted Account
simple get requests can help scrape user data
11:10
EM
Cool project dev, much faster than some other APIs I was using before
11:11
catwifhat
How to obtain the coins created by the creator in pump on the chain?
11:11
EM
only issue is sometimes, after running a transaction, it gives me a txn and no errors, but when i paste the txn in a blockchain explorer, it says the transaction didn't go through. any reason why?
11:12
Deleted Account
Same, high volume has about 60% success rate
11:12
as in i need a larger transaction for a better chance for it to go through?
11:13
Deleted Account
When placing sequential orders quickly I see the tx hash is returned without error but the order is never filled
11:13
I added at least 2 second timeout between orders to improve success rate
11:14
EM
ahhh i'm not doing sequential orders tho, i'm just trying to do 1 rly fast transaction. only issue is the order isn't filled and i can't figure out how to fix it
11:18
JakeDev - I WILL NOT CALL OR DM YOU
Some times they hang for a while. Can you send me the tx signature?
11:20
EM
sure should i send it here?
11:20
JakeDev - I WILL NOT CALL OR DM YOU
dm
11:41
JakeDev - I WILL NOT CALL OR DM YOU
Land rate looks to be improving a bit, still watching it
😎
Alejandro invited Alejandro
12:12
Rose
Hey there Alejandro, and welcome to PumpPortalAPI! How are you?
12:13
is there a way to listen via WS, all the new tokens published in
pump.fun?
12:16
JakeDev - I WILL NOT CALL OR DM YOU
Hey, Yes you can listen to token creation events by connecting to the websocket and sending the "subscribeNewToken" method to it
https://pumpportal.fun/data-api/real-time
12:23
Alejandro
so in that case there is no need to specify a CA
12:24
JakeDev - I WILL NOT CALL OR DM YOU
How would you know the CA before the token is created 😭
🤣
12:25
Alejandro
I only remove the payloads of the CA and that's all?
12:26
JakeDev - I WILL NOT CALL OR DM YOU
Ah, yeah those are there for examples of the other methods. If you're just listening to token creation events, you can remove the code below "// Subscribing to trades made by accounts" and "// Subscribing to trades on tokens"
13:02
Deleted Account
respectfully this api sux, its slow and inconsistent asf.
👎
13:02
JakeDev - I WILL NOT CALL OR DM YOU
Solana is slow and inconsistent unfortunately
13:03
We will be rolling out a feature soon that allows you to specify fees, that should help a lot
13:03
Deleted Account
understanble how do the mfs be buying so quick doe
13:03
like I be seeing kids buy before the dev lmao
13:03
JakeDev - I WILL NOT CALL OR DM YOU
I think that's usually a glitch in Pump's ui
13:04
So increasing the fees would increase the speed of the bot I assume?
13:04
JakeDev - I WILL NOT CALL OR DM YOU
Pump's ui lags a lot and doesn't show a lot of transactions
13:04
Right now we are trying to balance keeping fees low, and getting transactions through
13:05
But you should soon be able to pay a higher fee to get your transaction through faster
13:05
Deleted Account
why not let the user specify the priority fee field in their request
13:05
JakeDev - I WILL NOT CALL OR DM YOU
Yeah that's what we're adding
👍
13:05
Deleted Account
bet
13:06
JakeDev - I WILL NOT CALL OR DM YOU
This should be available today or tommorow
🔥
13:08
Alejandro
I'm getting this response
13:10
JakeDev - I WILL NOT CALL OR DM YOU
If you keep trying it should land,
13:10
We're working on improving land rate
13:18
Alejandro
Jito tips? not yet?
13:18
JakeDev - I WILL NOT CALL OR DM YOU
Yeah we're submitting txns as jito bundles, but jito tips are wack to today
13:20
We're going to add a priorityFee field to the request. And we'll attempt the transaction both through several rpcs and as jito bundles. If it goes through as a jito bundle, the priorityFee amount will be used as the Jito tip
13:21
Based on our testing Jito bundles go through much more reliably, so that is what will show up on transactions most of the time
👍
14:33
Alejandro
It also would be great if the response can returns more info about the traderPublickKey, ie. historic token creation, performance, etc. In order to make a better buying decision
14:57
JakeDev - I WILL NOT CALL OR DM YOU
IT'S HERE: the much requested option to specify priority fees in requests! Docs have also been updated.
https://pumpportal.fun/trading-api/
14:58
Most transactions will land first as Jito bundles, so you will see that fee amount appear as a transfer to a "Jito tip" account:
14:58
CrypTho
Awesome, great job 🥳
❤
15:01
Deleted Account
Fantastic
15:02
Any way to subscribe to trade activity across the entire bonding curve, not only specific contract?
15:03
JakeDev - I WILL NOT CALL OR DM YOU
Sorry no, only specific addresses at this time
🙏
15:03
Deleted Account
Currently pull on-msg console logs through https but seems missing significant amount of activity
15:04
JakeDev - I WILL NOT CALL OR DM YOU
You mean the websocket isn't sending some transactions?
15:06
Deleted Account
nah I mean for whatever reason pumpfun logs trade activity for entire site through console, this is useful for checking volume across the site to target specific contracts. However the quantity of logs seems much lower than we would expect for total trade activity.
15:07
JakeDev - I WILL NOT CALL OR DM YOU
Ohh, yeah there is definitely a lot they don't pick up
15:07
Deleted Account
If there were a transaction stream available for subscription it would be ideal obviously but this works for now
18:06
Alejandro
can somebody tell me how I can get the price of a Token, I have the data ofTokensInBondingCurve & vSolInBondingCurve & marketCapSol
18:38
Josh
Can you just divide the market cap by the total supply in sol to get the price per token in sol? Pretty sure
pump.fun tokens have 1 billion tokens
18:39
That's a total guess could be wrong
18:53
EM
anyone got an idea as to why i'm getting this error?
{'errors': 'Failed to get bonding curve for mint: TOKEN-ADDRESS'}
18:54
i replaced the actual Ca with TOKEN-ADDRESS btw
19:35
JakeDev - I WILL NOT CALL OR DM YOU
You should start by looking into the Uniswap V2 X*y=k formula. That is the same pricing formula that Pump uses. then you can calculate the price in sol for a buy or sell for an amount of tokens
21:00
JakeDev - I WILL NOT CALL OR DM YOU
Had reports of errors when attempting to buy tokens immediately after creation. It should be fixed now, but let me know if anyone still runs into issues!
21:30
Deleted Account
I noticed the price of solana went down, when it is only supposed to go up. Is there something you can do?
❤
🌚
21:31
JakeDev - I WILL NOT CALL OR DM YOU
I'll make a phone call
❤
4
21:32
Deleted Account
tysm 🥹
02:49
CrypTho
You guys ever sleep? 😅 Delivering 24/7, really impressive, great job 👏🏼
06:54
Rose
Hey there David, and welcome to PumpPortalAPI! How are you?
14:41
NEMO
Is the API down?
14:42
Alejandro
it's working for me
14:45
NEMO
buy/sell as well? What's the jito fee you're using?
20:46
Rose
Hey there Anon, and welcome to PumpPortalAPI! How are you?
Gallant Knight invited Gallant Knight
23:42
Rose
Hey there Gallant, and welcome to PumpPortalAPI! How are you?
23:45
Gallant Knight
How can I get username of new tokens by websocket?
23:47
Now, there is only mint address of token.
23:47
Deleted Account
poll for token metadata recursively with exponential timeout until it returns
Buckbuck {🪣,🐻❄️} invited Buckbuck {🪣,🐻❄️}
04:46
Rose
Hey there Mimento, and welcome to PumpPortalAPI! How are you?
04:53
Buckbuck {🪣,🐻❄️}
Hey, when i trigger a sell i get the following error:
"Program log: AnchorError caused by account: associated_user. Error Code: AccountNotInitialized. Error Number: 3012. Error Message: The program expected this account to be already initialized."
Kurt Mccall invited Kurt Mccall
05:35
Rose
Hey there Kurt, and welcome to PumpPortalAPI! How are you?
06:00
Starwolf Ship Handler
LowCapGems.com invited LowCapGems.com
06:39
Rose
Hey there LowCapGems.com, and welcome to PumpPortalAPI! How are you?
06:51
LowCapGems.com
Hi guys.
07:20
Rose
Hey there Jed, and welcome to PumpPortalAPI! How are you?
07:21
There is no api for blast pump fun?
09:14
JakeDev - I WILL NOT CALL OR DM YOU
That means no token account could be found on the wallet for the token you tried to sell. Are you sure the wallet you tried to sell from had the tokens you tried to sell?
09:14
Buckbuck {🪣,🐻❄️}
Yeah I figured out thanks
👍
09:15
i put the amount in sol, instead of tokenamount
09:15
JakeDev - I WILL NOT CALL OR DM YOU
No, only Solana
09:15
Buckbuck {🪣,🐻❄️}
Love it! did a first run now
😁
09:15
JakeDev - I WILL NOT CALL OR DM YOU
09:16
Rose
Hey there MQ, and welcome to PumpPortalAPI! How are you?
09:16
Buckbuck {🪣,🐻❄️}
jakedev
09:16
what are some functionalities/features you are working on now?
09:16
do you have some type of roadmap
09:16
so im not building things right now which will be there in a week 😄
09:18
JakeDev - I WILL NOT CALL OR DM YOU
Sure! The plan is to start expanding beyond Pump. We want to allow Raydium swaps as well, and even other pools in the future. Raydium swaps should be available in the next couple weeks :)
🔥
09:19
Buckbuck {🪣,🐻❄️}
alright
09:19
i do have 1 question maybe you know
09:19
JakeDev - I WILL NOT CALL OR DM YOU
tbd right now, focusing on growth first :)
09:19
Buckbuck {🪣,🐻❄️}
but in the browser it works
09:20
cant seem to get a result, any idea?
09:20
JakeDev - I WILL NOT CALL OR DM YOU
Hmm what are you using to make requests?
09:23
Rose
Hey there proc, and welcome to PumpPortalAPI! How are you?
09:23
JakeDev - I WILL NOT CALL OR DM YOU
09:23
Rose
Saved 1 filters in PumpPortalAPI:
- website
09:24
Buckbuck {🪣,🐻❄️}
export async function fetchTokenInfo(mint: string): Promise<TokenInfo> {
const url = https://pumpportal.fun/api/data/token-info?ca=${mint};
const response = await fetch(url, {
headers: {
'Content-Type': 'application/json',
'Accept': 'application/json'
}
});
if (!response.ok) {
throw new Error(`HTTP error! status: ${response.status}`);
}
const data = await response.json();
return data;
}
09:24
which returns 403 Forbidden
09:32
JakeDev - I WILL NOT CALL OR DM YOU
Hm yeah that seems fine, will see if I can see what's causing the 403 when I get a chance to look at the server logs
09:33
/filter ca Hey everyone. PumpPortal does NOT have an official token at this time. Do not buy scams. Any launch will be announce here and on the website first.
09:33
Rose
Saved 1 filters in PumpPortalAPI:
- ca
Lost In The Sauce invited Lost In The Sauce
10:02
Rose
Hey there The, and welcome to PumpPortalAPI! How are you?
11:41
Alejandro
when we buy a token through the API, is possible to get, as a response, the amount of the token bought?
12:05
EM
thats the same thing i'm trying to figure out
12:14
Rose
Hey there A, and welcome to PumpPortalAPI! How are you?
12:29
JakeDev - I WILL NOT CALL OR DM YOU
This info was in the responses originally, but it was removed because the API was not fetching this super reliably. Still looking whether we can add this back without impacting speed and reliability.
In the mean time, you could track this info by using 'subscribeAccountTrade' on the websocket with your wallet public key, to watch your own account
👍
13:35
NEMO
@JakeDevSol Can we get some sort of a way to check if the api is running or not and current recommended fee/jito?
I think it's down again.. No change to my code, and the same script that was working the other day is failing now
Know Botty invited Know Botty
13:42
Rose
Hey there Know, and welcome to PumpPortalAPI! How are you?
13:45
JakeDev - I WILL NOT CALL OR DM YOU
See here, jito tips are high right now. We are adding a status page for the api soon, but it looks stable right now
13:46
NEMO
Not working for me right now
13:47
JakeDev - I WILL NOT CALL OR DM YOU
Getting signatures in responses, but txns not landing?
13:48
buy/sell not working
13:49
JakeDev - I WILL NOT CALL OR DM YOU
Taking a look
13:51
NEMO
Sometimes getting Failed to buy token ... due to: undefined , sometimes "failed to send transaction: Transaction simulation failed: Error processing Instruction 2: Provided owner is not allowed"
14:22
Rose
Hey there Uccio, and welcome to PumpPortalAPI! How are you?
14:23
was wondering if there is an end point to collect creator information (such us coins created and whether they reached king of the hill/radyim) with your api
16:11
Alejandro
can we select the RPC? may be a Paid one?
17:58
Gallant Knight
💑Could you know ths cpi for trading?💑
👍
18:01
JakeDev - I WILL NOT CALL OR DM YOU
It looks like some issues early today were caused by high traffic. Everything seems stable at this point. Working on improving load balancing so we can scale further without issue
18:04
KOTH is 200 sol market cap I believe, so you could track tokens as they are created on the real-time websocket, and keep track of whether they're hit KOTH. At some point PumpPortal should be able to do this for you. Any other info not in the docs, you'll have to get from the chain using other means
Yasir - PumpMasterBots invited Yasir - PumpMasterBots
02:26
Rose
Hey there Yasir, and welcome to PumpPortalAPI! How are you?
06:40
catwifhat
Have you considered allowing users to customize nodes?
08:02
JakeDev - I WILL NOT CALL OR DM YOU
Yes allowing custom rpc nodes is in the roadmap. Working on Raydium swaps currently :)
🔥
08:08
Rose
Hey there Oleksii, and welcome to PumpPortalAPI! How are you?
😁
08:23
Rose
Hey there Oleksii, and welcome to PumpPortalAPI! How are you?
08:51
JakeDev - I WILL NOT CALL OR DM YOU
fyi
08:51
JakeDev - I WILL NOT CALL OR DM YOU
Alon 02.05.2024 06:50:09
quick update: the minimum trade size for a coin to be bumped in the bump order page has been increased to 0.01 SOL to disadvantage dev farms and incentivize more organic discovery
10:08
Josh
What was it previously, I always did 0.01 because I thought it was the minimum
Poloo - Pumpfun Microbuys Bot invited Poloo - Pumpfun Microbuys Bot
10:11
Rose
Hey there Poloo, and welcome to PumpPortalAPI! How are you?
10:12
Poloo - Pumpfun Microbuys Bot
Who's the dev
10:12
You bro? What a great service you are providing
🥰
10:14
EM
Idk for sure but I used to do 0.005 for tests and that showed up
14:53
// Subscribing to trades made by accounts
payload = {
method: "subscribeAccountTrade",
keys: ["AArPXm8JatJiuyEffuC1un2Sc835SULa4uQqDcaGpAjV"] // array of accounts to watch
}
ws.send(JSON.stringify(payload));
14:53
when i run it i only get the 'buys' not the 'sells' is that expected bahaviour?
14:53
would be great to have also the sells.
14:55
JakeDev - I WILL NOT CALL OR DM YOU
That should get you sells as well
14:56
Rose
Hey there Yassir, and welcome to PumpPortalAPI! How are you?
14:57
Buckbuck {🪣,🐻❄️}
alright thanks, im only getting buys yes, no sells
15:05
you think you can check it now?
15:05
Rose
Hey there Ryan, and welcome to PumpPortalAPI! How are you?
15:38
Alejandro
I usually get Sells Too
15:39
@JakeDevSol One question, is there a way to confirm if the buy is done, in order to proceed for the sell?
15:52
or just with "subscribeAccountTrade"?
16:17
Rose
Hey there xbt, and welcome to PumpPortalAPI! How are you?
surfmore invited surfmore
16:48
Rose
Hey there surfmore, and welcome to PumpPortalAPI! How are you?
16:53
JakeDev - I WILL NOT CALL OR DM YOU
subscribeAccountTrade is a good way to do this yes
16:54
I haven't seen this at all, if you see this again, could you send the tx signature?
kad romnic invited kad romnic
17:18
Rose
Hey there kad, and welcome to PumpPortalAPI! How are you?
20:02
Alejandro
I'm receiving this error Sell data {'errors': ['Program log: AnchorError caused by account: associated_user. Error Code: AccountNotInitialized. Error Number: 3012. Error Message: The program expected this account to be already initialized.']}
20:27
JakeDev - I WILL NOT CALL OR DM YOU
Generally means you're trying to sell from an account that doesn't have the specified tokens
Hizzle Thizzle invited Hizzle Thizzle
21:35
Rose
Hey there Hizzle, and welcome to PumpPortalAPI! How are you?
21:38
Hizzle Thizzle
im good thx. how can i understand the error: "Cannot read properties of undefined (reading '_bn)'" ?
22:47
Deleted Account
Address is incorrect or newly created
22:49
Hizzle Thizzle
Yeeeh i found it… i was Trading a Club on PF that already Hit raydium, dunno why.
23:18
Deleted Account
Ah there you go
02:48
Rose
Hey there Steppo, and welcome to PumpPortalAPI! How are you?
👌
08:44
Rose
Hey there Joel, and welcome to PumpPortalAPI! How are you?
14:05
Rose
Hey there Mathew, and welcome to PumpPortalAPI! How are you?
CTO SENDOR invited CTO SENDOR
14:05
Rose
Hey there Hinu, and welcome to PumpPortalAPI! How are you?
14:07
Let say if we have bought a coin with 1 sol multiple times and then we want to sell at once how to get the amount of tokens?
14:57
JakeDev - I WILL NOT CALL OR DM YOU
You can track your amount of tokens in a few ways
14:57
You could watch your wallet with the websocket for one
14:57
Going to be adding an option to sell a percentage of token holding soon
14:58
JakeDev - I WILL NOT CALL OR DM YOU
👀👀👀
14:59
Alejandro
also is important to get the confirmation of the transaction on the response
15:04
Rose
Hey there Tim, and welcome to PumpPortalAPI! How are you?
15:28
Tim
This is awesome, I'm excited to use this. My only concern is that I have to create the wallet through your api so you have access to the private key?
15:32
Alejandro
just don't keep the earnings on that wallet. Only the amount you need to invest.
15:36
Tim
Yeah, I totally agree and that what I planned on doing I'm just calling it out
👍
15:36
JakeDev - I WILL NOT CALL OR DM YOU
Yeah this is a good option if you're worried. FWIW we don't store private keys, your api key contains an encrypted private key that decrypted to sign transactions at time of trade.
👍
15:55
Rose
Hey there ahmed, and welcome to PumpPortalAPI! How are you?
15:55
Santino
How to send the money to another wallet ?
16:03
JakeDev - I WILL NOT CALL OR DM YOU
The API can't do that for you. You can do it like with any other account
16:04
Santino
I see, thank you
16:04
JakeDev - I WILL NOT CALL OR DM YOU
So with Web3.js for example. Or you can always restore your wallet private key in any solana wallet, and transfer funds manually from there.
16:05
Santino
I want to automate the whole process, so I'm going with web3.js i guess
16:06
JakeDev - I WILL NOT CALL OR DM YOU
Ah yeah, to automate it you will need something like that to send transactions to the blockchain
16:10
Tim
Jake, what are you using under the hood for your swaps for
pump.fun?
16:13
JakeDev - I WILL NOT CALL OR DM YOU
Totally custom built program for building and encoding transactions for sending direct to the blockchain through RPCs and Jito bundles
17:12
Hizzle Thizzle
Hey Folks! I have a question regarding the Transaction Simulation. Today i wanted to buy a coin with the Trade-API, but the Transaction failed due to the simulation. I got the error Message "failed to send transaction: Transaction simulation failed: Error processing Instruction 4: custom program error: 0x1".
17:28
Hizzle Thizzle
the coin was fresh and this was my request:
Request sent to::
https://pumpportal.fun/api/trade?api-key=<VALID API KEY THAT WORKED ON OHTER TRADES>
array(1) { ["http"]=> array(3) { ["method"]=> string(4) "POST" ["header"]=> string(30) "Content-Type: application/json" ["content"]=> string(203) "{"action":"buy","mint":"DUbenPVysgGgJpPRRGy5BZdXBgaSTDs5TrW9LwkFsmyq","amount":10000,"denominatedInSol":"false","slippage":30,"priorityFee":0.005000000000000000104083408558608425664715468883514404296875}" } }
Balance on Wallet was good enough for the trade. Any Ideas ?
17:28
Answer from API: {"errors":["failed to send transaction: Transaction simulation failed: Error processing Instruction 4: custom program error: 0x1"]}
17:33
Alejandro
do you have the Python implementation to subscribe to the ws events. I'm using a bad converted one and I cannot handle very well the responses. Maybe asyncio library is needed.
17:57
JakeDev - I WILL NOT CALL OR DM YOU
Not at the time being, will work on adding on to the docs
17:58
A brand new coin? Likely failed due to slippage not being high enough
01:33
Steppo
Love the api! Feature-idea: an endpoint where you can provide the mint and the amount of tokens you hold and which returns the estimated sol you would receive based on the state of the bonding curve. Basically how it is done on the FE of
pump.fun
08:08
David
Were you able to fix the error? Have the same issue
09:25
Santino
I'm getting this error when selling
09:25
{'errors': ['failed to send transaction: Transaction simulation failed: Error processing Instruction 3: custom program error: 0x1']}
09:31
Just fixed it, turns out i omitted a parameter
Shodeler invited Shodeler
09:41
Rose
Hey there Momchil, and welcome to PumpPortalAPI! How are you?
fooBar Baz123 invited fooBar Baz123
12:54
Rose
Hey there fooBar, and welcome to PumpPortalAPI! How are you?
17:43
Rose
Hey there Luis, and welcome to PumpPortalAPI! How are you?
00:07
Rose
Hey there alex, and welcome to PumpPortalAPI! How are you?
00:08
Hey there alex, and welcome to PumpPortalAPI! How are you?
05:05
Steve
yo im working on a project h which uses this
06:25
Alejandro
great!, send more details
10:37
Steppo
Is the api working? I get tx-hashes.. but no buys happen and can’t find the tx on solscan
10:49
JakeDev - I WILL NOT CALL OR DM YOU
You may need to up the priority fee to get it to land
👍
17:25
Steve
will be an in browser sniper bot
17:25
would love to partner with u guys. dm me if interested
17:25
EM
in browser? how would that work?
17:26
Steve
you deposit money, select a channel to snipe -> $$$
17:26
i tried creating one, but it's python
17:26
Steve
im a professional dev so pretty ez for me
17:26
EM
nice fair enough
02:26
Rose
Hey there luo, and welcome to PumpPortalAPI! How are you?
Deleted invited Deleted Account
03:39
Rose
Hey there bill, and welcome to PumpPortalAPI! How are you?
04:41
luo tuo
does anyone know how to decode pump's bonding curve account info?
Deleted invited Deleted Account
05:03
Rose
Hey there Balance, and welcome to PumpPortalAPI! How are you?
05:13
Deleted Account
hey guys is there a way to detect new koths with the api?
ilgai ir laimingai invited ilgai ir laimingai
06:22
Rose
Hey there ilgai ir laimingai, and welcome to PumpPortalAPI! How are you?
11:06
Rose
Hey there Saad, and welcome to PumpPortalAPI! How are you?
Deleted invited Deleted Account
11:08
Rose
Hey there CTO ROG, and welcome to PumpPortalAPI! How are you?
11:09
Deleted Account
where can i access my wallet?
11:10
Rose
Hey there Maz, and welcome to PumpPortalAPI! How are you?
11:10
JakeDev - I WILL NOT CALL OR DM YOU
You can restore your private key in any wallet software
11:10
Deleted Account
phantom works?
11:10
JakeDev - I WILL NOT CALL OR DM YOU
Yep :)
11:10
Deleted Account
noice
11:36
can u help me out ?
JakeDev - I WILL NOT CALL OR DM YOU created topic «Announcements»
12:22
JakeDev - I WILL NOT CALL OR DM YOU
Adding some separate topics to the TG to keep things organized. Announcements about PumpPortal will be posted here.
👍
4
JakeDev - I WILL NOT CALL OR DM YOU changed topic icon to «0»
JakeDev - I WILL NOT CALL OR DM YOU created topic «Off-Topic Chat»
12:25
JakeDev - I WILL NOT CALL OR DM YOU
Anything not strictly PumpPortal related can go here
❤
JakeDev - I WILL NOT CALL OR DM YOU changed topic title to «Welcome»,icon to «0»
JakeDev - I WILL NOT CALL OR DM YOU created topic «Dev»
12:28
JakeDev - I WILL NOT CALL OR DM YOU
General development questions and discussion can go here.
JakeDev - I WILL NOT CALL OR DM YOU changed topic title to «General Chat»,icon to «0»
12:31
Deleted Account
i need to implement this api
https://pumpportal.fun/api/data/token-info?ca=token-ca-here in my code to make it automated somehow
fyi im trying to create a pumpfun bot that scans for newly created tokens and tries to buy it as soon as its listed,
it also has the buy and sell logic coded in it it will buy and sell once a 100% profit has been made
12:32
--- request header ---GET
/data-api/real-time HTTP/1.1
Upgrade: websocketHost:
pumpportal.funOrigin:
https://pumpportal.funSec-WebSocket-Key: 4hqE+H//GWhenGLKnaFcMw==
Sec-WebSocket-Version: 13Connection: Upgrade
-------------------------- response header ---
HTTP/1.1 101 Switching ProtocolsServer: nginx/1.18.0
Date: Tue, 07 May 2024 17:27:14 GMTConnection: upgrade
Upgrade: websocketSec-WebSocket-Accept: qpokiESvbvdrtiOqwtLmWQf3gfo=
-----------------------Websocket connected
WebSocket openedChecking for new tokens...
Checking for new tokens...Checking for new tokens...
Checking for new tokens...Checking for new tokens...
Checking for new tokens...Checking for new tokens...
Checking for new tokens...Checking for new tokens...
Checking for new tokens...Checking for new tokens...
Checking for new tokens...Checking for new tokens...
Checking for new tokens...Checking for new tokens...
Checking for new tokens...Checking for new tokens...
Checking for new tokens...Checking for new tokens...
12:32
it now does the following only
12:32
if anyone has any idea please help a brother out :)
17:10
Deleted Account
Anyone else working on a automated pumpfun bot ?
17:15
EM
Automated in what sense?
17:16
Deleted Account
i developed a code that tracks newly generated tokens and automatically buy it on pump fun tokens that are new max age 30 seconds - 1 minute
17:16
i also added a trade logic that once a 50-100% profit is hit depending on how long it took for the token to reach that percentage it will dump and take its profits
17:17
EM
So a sniper hot?
17:17
Deleted Account
sort of yeah but automated in selling and taking profits
17:17
EM
Interesting I kinda did smt similar
17:17
Why does yours take 30 seconds to buy tho?
17:17
Deleted Account
there is also a logic implemented that if the token reaches 100% profit in under 45 seconds it will wait and check if there is a possibility to take 200% or 300% profit instead of 50-100%
17:18
im almost done with it but im stuck here
17:19
EM
Might be able to help
17:19
What language r u in?
17:19
Deleted Account
cool i sent you a dm
19:14
Alejandro
What RPC does the Bot use?
20:13
JakeDev - I WILL NOT CALL OR DM YOU
Helius and Quicknode for data, the transactions are submitted to Jito validators
Dann| iRebates BD invited Dann| iRebates BD
22:43
Rose
Hey there Dann, and welcome to PumpPortalAPI! How are you?
22:44
Dann| iRebates BD
Hello. Is 0.5% of transactions too much? Can I open an offer with lower transaction fees directly with you?
22:47
And I want to find token information in the wallet, do you have any API available?
22:48
JakeDev - I WILL NOT CALL OR DM YOU
Sorry, fees are fixed.
22:49
Dann| iRebates BD
ok so about token information, can the api get it or do I need to work directly with the wallet?
22:50
JakeDev - I WILL NOT CALL OR DM YOU
You mean like checking which tokens are in your wallet? You could watch your wallet with the websockets to track trades in real time. Or you could also get it with regular RPC methods
22:51
Dann| iRebates BD
Okay understood. I want to learn before creating my project. 0.5% will be 0.5% of the transaction token amount, right? For example, if I trade a certain token with a value of 100usdt, I will be charged a fee of 0.5usdt, right?
22:52
JakeDev - I WILL NOT CALL OR DM YOU
Yes that's correct
22:54
Dann| iRebates BD
Haha. Agree. I will register. I have a question about transaction wallets. 1 API key can only be used for 1 wallet, right? Or can one api key be traded on many wallets?
22:54
I will need 5 or 7 wallets to trade at the same time but I only need 1 API key, right?
23:02
JakeDev - I WILL NOT CALL OR DM YOU
Oh no, 1 api key is linked to 1 wallet
23:02
You can make as many as you need though
23:03
Just don't lose your keys, they are not recoverable
23:04
Dann| iRebates BD
Okay understood. Thank you very much for answering the question.
👍
23:05
I asked first to get code direction.
23:05
Thank you. From Dann with love
01:39
Rose
Hey there Boris, and welcome to PumpPortalAPI! How are you?
Anderson invited Anderson
02:11
Rose
Hey there Anderson, and welcome to PumpPortalAPI! How are you?
05:02
Rose
Hey there Buck, and welcome to PumpPortalAPI! How are you?
05:03
Buck
subscribeAccountTrade method only shows buy transactions
05:03
is there any way to see the sells too?
05:03
I kinda wanted to track a specific account's activity
08:02
JakeDev - I WILL NOT CALL OR DM YOU
Someone else reported this too, if this is happening this is a bug. I've always been able to get sells though. If you see a sell that doesn't come through on the websocket, could you send me the solscan link?
08:05
Buck
It's not showing any sells, that guy made at least 10 sales when I was on my pc but it was just not showing
08:05
And I will let you know once I get back home
14:12
Alejandro
is there a good wrapper in Python to interact with Solana, i.e. I want to check the balance of a token in my wallet, quantity of tokens, etc... Any reccomendations?
14:13
is possible to create an endpoint that indicates the token that completed the bonding curve, but aren't yet published at Raydium?
14:13
Deleted Account
@JakeDevSol thanks a lot i kept coding since yesterday
14:14
And my automated bot works now
14:14
It buys and sells automatically at pumpfun
🔥
14:16
Alejandro
you sell at a fixed time or by percentage increase?
14:18
Deleted Account
Bot Feature
it buys new tokens that come out at 4.4k marketcap max
it buys only when dev holds lower than 6.5% supply
90% of the time you will be the 2nd buyer (After dev)
it sells at X amount of Mcap you want to sell it for lets say x2 so 8.8k
it sells at 4.3k marketcap to minimalise risks
it sells within 15 seconds after you bought and there are no more than 4 buyers after you to minimalise risks
14:41
Hizzle Thizzle
jo any dev here ?
15:00
David
Sounds amazing
15:15
Deleted Account
Thanks man i will be selling the bot though
16:38
Deleted Account
video to show how my bot operates
20:33
Rose
Hey there Luuk, and welcome to PumpPortalAPI! How are you?
05:42
Luuk
I have the same
05:42
I'll send you a couple
05:46
It's the top TX that is the buy, of the token in the other picture. The buy after is another token and there was no sell message in between those 2 tx's (or later_
08:36
Luuk
Did you find a fix for this?
08:37
JakeDev - I WILL NOT CALL OR DM YOU
I think I've identified the issue, should be patched soon
❤
Daniel Ketov invited Daniel Ketov
08:50
Rose
Hey there Daniel, and welcome to PumpPortalAPI! How are you?
08:51
Daniel Ketov
Hey guys, I'm trying to get tokens addresses from ws but this error occures
{
"errors": "Invalid message. Failed to subscribe."
}
subscribeNewToken
Connected to wss://pumpportal.fun/api/data
09:03
JakeDev - I WILL NOT CALL OR DM YOU
This should be fixed now. Sells by certain bots were formatted weird and not getting picked up. Let me know if you still have any issue seeing sells.
09:05
I'd have to see how you're sending the subscribe message to the websocket to see if you're doing it correctly.
09:41
JakeDev - I WILL NOT CALL OR DM YOU
Ah yeah that's not subscribing correctly, you'll need to send your subscription message as JSON
👍
09:42
I haven't used websocketking, but using this for your payload should work:
{method: "subscribeNewToken"}
10:52
JakeDev - I WILL NOT CALL OR DM YOU
Hey all! PumpPortal now supports Raydium!!
You can now use the Trade API to make trades on Pump tokens after they have migrated to Raydium. To trade a Raydium token, you just need to specify the option: pool: "raydium" in your calls to the trade endpoint. If you do not specify the pool option, PumpPortal will attempt to trade on Pump by default, so there is no need to change your existing code for trading on Pump.
https://pumpportal.fun/trading-api/Current Limitations:
1. There is no way to get an update from the API when a token migrates to Raydium.
2. There is no way to stream real-time trades on Raydium from the websocket.
If you need the information above, you will need to roll your own solution to collect it, for the time being.
(edit) 3. Raydium trades may only work for Raydium V4 AMM pools, the type that
Pump.fun creates after bonding.
holla at me in
#Dev if you have issues or questions
14:45
Rose
Hey there Pr, and welcome to PumpPortalAPI! How are you?
17:15
Deleted Account
Anyone here have experience on integrating python bots to telegram bots?
17:19
@JakeDevSol is there any way to get an update every second marketcaps of pumpfun tokens?
17:21
JakeDev - I WILL NOT CALL OR DM YOU
The best way is with subscribeTokenTrade on the websocket, that way you get the update market cap after each trade.
17:21
That gives you market cap in sol, but you can just multiply by the current price of sol if you need USD market cap
17:22
Deleted Account
Okay because i implemented a sell logic into my bot
17:22
If marketcap hits 8800$ sell all tokens
17:23
Buy new tokens at 4400$ marketcap
Once marketcap goes below 4300$ auto sell to minimalise risk
🔥
17:23
So i need the price in usd
17:24
JakeDev - I WILL NOT CALL OR DM YOU
Might miss out on some big gains if some of them really moon. But idk the optimal strategy
17:24
Deleted Account
Yeah thats correct i am going to implement to sell 85% of tokens instead of to dump all when marketcap hits 8800$
17:24
But I need the sell feature to work first
17:25
It doesn’t work because of this
17:25
JakeDev - I WILL NOT CALL OR DM YOU
Ok yeah, subscribeTokenTrade on the websocket is the best way to get MC
17:26
You know how to use websockets?
17:26
Im a noob in coding
17:27
JakeDev - I WILL NOT CALL OR DM YOU
Yeah websockets are a little more advanced I guess, but most languages have pretty simple, well documented libraries
17:28
Deleted Account
So i need to implement this subscribeTokenTrade
Into the code right
17:29
JakeDev - I WILL NOT CALL OR DM YOU
yeah basically you need to connect to the websocket, then send subscribeTokenTrade to it, and then you'll get messages with all the trades on that token.
17:30
Deleted Account
Okay
19:04
Alejandro
you can paste the Javascript version into ChatGPT and ask to convert it to python. It worked for me.
👏
21:23
Rose
Hey there Yatel, and welcome to PumpPortalAPI! How are you?
23:19
JakeDev - I WILL NOT CALL OR DM YOU
5 calls per second per ip
23:20
Dann| iRebates BD
fake ip=))
23:20
JakeDev - I WILL NOT CALL OR DM YOU
damn lol
23:21
Dann| iRebates BD
maybe I also have the same idea. I think you need to upgrade the system
23:21
Deleted Account
Damn 100 per second
23:21
For what u gonna use that bruh
23:21
Hack the government or what
🤣
23:23
Dann| iRebates BD
hahaha there's a delay anyway so I don't think it's that important anymore. Or you can return a certain promise until it returns before calling again haha
❤
23:24
hahaha I didn't ask the other day but it seems like 5 seconds is a bit low.
23:29
Deleted Account
My bot is like 99% finished now have made so much progress today
23:29
Can’t wait when it fully works
23:50
Deleted Account
What are u trying to make ?
23:51
Price of the tokens?
crazy hu invited crazy hu
00:27
Rose
Hey there crazy, and welcome to PumpPortalAPI! How are you?
00:34
JakeDev - I WILL NOT CALL OR DM YOU
Quality of Life update:
It is now possible to sell a *percentage* of tokens in your wallet with PumpPortal!
For amount just use a string ending in '%'. Example options:
{
"action": "sell",
"mint": "your CA here",
"amount": "100%",
"denominatedInSol": "false",
"slippage": 10,
"priorityFee": 0.005
}
You can of course still sell an amount of sol or tokens, so no need to change existing code.
👍
6
00:35
Research "Uniswap V2 x*y=k formula" Pump prices tokens in the exact same way.
00:45
You could use subscribeTokenTrade on the websocket. That will send you the new amount of virtual_tokens and virtual_sol in the bonding curve after each trade
https://pumpportal.fun/data-api/real-time
02:14
EM
Perfect timing lol
04:17
Rose
Hey there Zz, and welcome to PumpPortalAPI! How are you?
04:18
Rose
Hey there Dev17Red, and welcome to PumpPortalAPI! How are you?
05:21
Zz
Hi ! Quick question, when you want to subscribe to trades to another coin do you need to resend the whole keys array with the previous coins you were watching, or just the new one ?
05:35
ilgai ir laimingai
subscribeTokenTrade updates the token data (price, marketcapsol and everything)?
06:36
Alejandro
Any plans to develop the "createToken" endpoint?
09:55
Rose
Hey there Oleksii, and welcome to PumpPortalAPI! How are you?
09:55
O
Any chance to not display this in my transactions?
13:12
Rose
Hey there Tom, and welcome to PumpPortalAPI! How are you?
13:13
From the subscribeTokenTrade how do we get the token name?
{
signature: '5zHzeEie2z1oJ4w1DYEcM2X71cvtFkWrueoF5f1ncGgaQxpUMhz2pg2oHJN3x1rP7mGSSMXHxyGot9wdJ1yXrFmM',
mint: 'DKToFzgAbrR6EJgASn2DTUTL1xPeZhGNUypYYaEFuBoE',
traderPublicKey: 'EStFHx8VF9nFDydUYwYB3rjd1wG4h4AnHg7HFbia1RA9',
txType: 'create',
initialBuy: 3564784.053156,
bondingCurveKey: 'B2rkFEp5xyJfamiFqSBw6qo7uv9zXzPu8pYQ2NvkfD4z',
vTokensInBondingCurve:
1069435215.946844,
vSolInBondingCurve: 30.099999999999998,
marketCapSol: 28.145697421559486
}
13:15
is it by using mint and getting the token info elsewhere?
13:20
JakeDev - I WILL NOT CALL OR DM YOU
👍
13:21
Tom
Right, makes sense thanks
13:21
JakeDev - I WILL NOT CALL OR DM YOU
Just replace 'token-ca-here' with the mint from subscribeTokenTrade
👍
13:22
We could potentially work something out. DM
14:31
Rose
Hey everyone. PumpPortal does NOT have an official token at this time. Do not buy scams. Any launch will be announce here and on the website first.
14:32
Deleted Account
What are u trying to develop
14:32
Rose
Hey everyone. PumpPortal does NOT have an official token at this time. Do not buy scams. Any launch will be announce here and on the website first.
14:32
Tom
Is that true? And if so, for how long on average ?
14:33
Deleted Account
Idk man my bot auto searches for new tokens and it immediately buys it too
❤
14:33
Rose
Hey everyone. PumpPortal does NOT have an official token at this time. Do not buy scams. Any launch will be announce here and on the website first.
14:34
Tom
Sorry I keep setting off the bot..
14:34
Deleted Account
Ahhh ehhh i have no idea man
14:34
Tom
haha its alright
14:34
what else are you going to develop on the future to improve what you havenow?
14:36
Deleted Account
I’m almost done with the bot auto selling the new tokens once it has profit
14:36
And it also dumps once a x amount of marketcap got triggered
14:36
Deleted Account
Like it buys at maximum 4400$ marketcap
14:37
If the marketcap hits 4300$ it auto dumps
14:37
To minimalise losses
14:37
Its like 99% finished
14:37
Tom
impressive bro nice job
14:38
Deleted Account
Thanks bro
14:43
Rose
Hey there Dead, and welcome to PumpPortalAPI! How are you?
15:59
Alejandro
there was an article today published on the web about
pump.fun, and it said that it doesn't have an API
15:59
Tom
Yea, it doesn't
16:00
JakeDev has made an unofficial one
Lilcutie invited Lilcutie
16:08
Rose
Hey there RunFAST, and welcome to PumpPortalAPI! How are you?
17:07
Tom
Is there something wrong with subscribeNewToken? I am not receiving any data
17:07
Deleted Account
What kind of data do u want to receive
17:07
Dm me if u need some help i can also try and help u out
17:07
Tom
Just to receive anything at this point..
17:08
Maybe I am rate limited or something it has been working a minute ago..
17:13
JakeDev - I WILL NOT CALL OR DM YOU
Sorry it's an issue with our Helius geyser rn, should be resolved soon. Trades are unaffected.
17:14
Tom
Makes sense, thanks man
18:35
JakeDev - I WILL NOT CALL OR DM YOU
Websocket issues have been resolved
20:22
Deleted Account
anyone else still having trouble with the websocket?
20:22
seems very slow for me today
20:43
Deleted Account
no one else having issues? no?
03:38
Dann| iRebates BD
pumpfunapi?
09:36
Shodeler
Hi i think there is a problem with "subscribeAccountTrade" - for the last 30 minutes buy transactions arent being displayed.
09:54
Rose
Hey there DBR, and welcome to PumpPortalAPI! How are you?
10:00
sbn128
Hello. There are also problems with SubscribeNewToken. Today worked fine. Now, instead of new tokens, tokens that were created 15-20 minutes ago appear.
10:36
Rose
Hey there H, and welcome to PumpPortalAPI! How are you?
10:58
Rose
Hey there 0xMage, and welcome to PumpPortalAPI! How are you?
10:58
0xMage
hi, dose your data API has some lag now?
11:22
EM
same here, tokens created 23 mins ago are appearing
11:33
0xMage
@JakeDevSol hi, are you there, do you need some help?
11:44
CrypTho
@JakeDevSol, I'd have a feature request: To receive an API key, you've to create a wallet. The API key is then linked to the wallet. It would significantly increase the security and convenience if there would be an option to generate an API key by calling a function with the public address as parameter. Then users could directly start using existing wallets, and not have to create a wallet and transfer SOL there to start trading.
11:44
EM
that would be pretty useful
12:16
JakeDev - I WILL NOT CALL OR DM YOU
😭 Sorry all. Should be fixed now.
👍
14:20
JakeDev - I WILL NOT CALL OR DM YOU
Hey devs 👋👋 just a reminder as I often see transactions fail for insufficient funds: You must keep enough solana in your wallets to cover fees (network, priority, and PumpPortal) when selling.
ILKebabbaro invited ILKebabbaro
14:41
Rose
Hey there ILKebabbaro, and welcome to PumpPortalAPI! How are you?
15:47
Rose
Hey there Roland, and welcome to PumpPortalAPI! How are you?
15:47
Roland
Hey, I am wondering, why the bonding_curve account SOL amount is not the same as
virtual_sol_reserves
?
It seems that there is always a const DELTA of 30 SOL
diegovilla.web3 invited diegovilla.web3
16:02
Rose
Hey there diegovilla.web3, and welcome to PumpPortalAPI! How are you?
17:30
Alejandro
Yes, 30 SOL is the ammount that provides
pump.fun in order to create a liquid market when creating pools
17:35
diegovilla.web3
Hi!
17:36
Is there any way to link my public key to API without expose my Private Key?
17:57
JakeDev - I WILL NOT CALL OR DM YOU
Sorry no, at this time you have to trade using a wallet created with PumpPortal, similar to how you would with a telegram bot like Bonk or Trojan. I have an idea for how it could work with a self-custody wallet, but I need some time to cook. In the mean-time, I totally understand not holding anything in trading wallets that you don't want to lose. NYKNYC after all
👍
18:19
Alejandro
if the transaction fails, we loose the Jito Tip?
18:21
JakeDev - I WILL NOT CALL OR DM YOU
Nope, all tips and fees are part of the same transaction. So it all succeeds or fails together
18:33
Alejandro
what is a reasonable tip?
18:37
JakeDev - I WILL NOT CALL OR DM YOU
Higher the tip the faster it's likely to go through. But the speed per tip is always changing. I just tested with 0.00015 and that took 9 seconds to land
18:37
Alejandro
what means this error? {'errors': ['failed to send transaction: Transaction simulation failed: Error processing Instruction 4: custom program error: 0x1']}
18:38
EM
from experience, a general fee of 0.02 gets me in about 1s, but jito fees vary
18:39
JakeDev - I WILL NOT CALL OR DM YOU
Either not enough sol for the trade, or failed due to slippage
18:45
Alejandro
what RPC do you use?
18:49
JakeDev - I WILL NOT CALL OR DM YOU
Helius for websockets, Jito (bundles) for transactions
19:00
Alejandro
do you set a fixed o variable tip into the parameters?
19:01
EM
i mean as of right now whenever i run the code, i check what jito fees are and then I edit it manually
19:01
but i am thinking of making it automated by geting jito fee prices on start
19:01
Alejandro
is there any api to theck the tip? where do you check?
19:03
Alejandro
so the idea would be between the 75th and 95th percentile?
19:03
EM
depends what r u using this for + how fast dyou need your transaction to go through in?
19:04
I want to make a sniping bot
19:06
EM
interesting, check DMs
20:02
Alejandro
what could be this error ['Program log: AnchorError caused by account: associated_user. Error Code: AccountNotInitialized. Error Number: 3012. Error Message: The program expected this account to be already initialized.']}?
20:10
Tom
What is this from?
20:11
Alejandro
response when trying to sell a token
20:13
is probably a token that I don't have
20:14
JakeDev - I WILL NOT CALL OR DM YOU
this ^
20:26
Alejandro
I'm receiving create events 32 minutes after creation
20:30
JakeDev - I WILL NOT CALL OR DM YOU
try reconnecting, should be fixed now
20:34
Alejandro
ok but we are loosing $$$ due to that
20:41
JakeDev - I WILL NOT CALL OR DM YOU
I know :( talking to a helius rep right now
20:45
They are "highly confident" the delay issue is resolved
20:46
Let me know if it happens again, looking into running our own geyser so we don't have to rely on them.
❤
👍
21:03
Alejandro
the transaction fees you are charging 0.5% over the SOL + Jitto Tips used?
21:03
JakeDev - I WILL NOT CALL OR DM YOU
Correct
21:04
pump.fun bonding curve also takes a 1% fee, no matter how you trade on it
21:05
Alejandro
oh, that's the address that starts with CebN5W that I couldn't understand what was
21:05
JakeDev - I WILL NOT CALL OR DM YOU
Yep, that's the pump fee wallet
21:06
Alejandro
you also add it to the sum in order to charge 0.5%?
21:06
JakeDev - I WILL NOT CALL OR DM YOU
No the 0.5% is just on the sol trade amount
21:07
It is calculated before slippage, so sometimes it might be a little higher or lower
21:08
Alejandro
is there any test environment to try the API?
21:10
JakeDev - I WILL NOT CALL OR DM YOU
sorry no, the bonding curve program itself is only on main-net afaik
21:11
Alejandro
because there is a thin line between loosing money limits and to finish configuring ok the bot.
21:12
JakeDev - I WILL NOT CALL OR DM YOU
yeah I know
00:18
Rose
Hey there Connor, and welcome to PumpPortalAPI! How are you?
00:19
Hey there Connor, and welcome to PumpPortalAPI! How are you?
06:07
Buck
prolly gonna be a dum question but if i want to listen to subscribeTokenTrade event for multiple token address, that dynamically get's updated, do i have to send the subscribeTokenTrade request with updated array of mint ids again or is there any other best practices? i mean there's not gonna be a delay or missed events if i go with that method?
10:48
Alejandro
there is no way to receive only the SubscribeTokenTrade event already filtered. You will receive all the events and filter them in your bot.
12:10
JakeDev - I WILL NOT CALL OR DM YOU
No you should be fine to use subscribeTokenTrade with the new mints to watch, those will be added to the existing mints you are subscribed to. When the ws connection is closed, all subscriptions are cleared, so you do have to resend all the mints you want to watch if you close and reopen a connection.
13:07
Buck
Is there any way to unsubscribe a specific mint
13:08
Cuz idk it can get too busy if I never stop the connection
13:13
JakeDev - I WILL NOT CALL OR DM YOU
No, you'll have to close and resub to the ones you want to watch
13:13
Or you can implement some filtering on your end of course
14:14
Thank you great work
02:05
Oof.
okay so here is where i can learn to make a better bot for SOL? :)
02:06
Thank you for your API access.
04:14
Steve
i love pump portal
04:18
building some very cool shit with it rn
04:22
Oof.
I am just learning right now
04:23
But I want to but some sort of web interface for games and connect it to pump so I can launch from there
04:23
I’d like to build lots of things for it! Hahaha
04:25
Steve
im building a sniperbot
04:25
tbh thats probs what everyone is doin
04:25
Tom
There’s loads to do
04:25
I’m making monitors
04:26
And eventually a bot
04:32
are you gonna publish it online?
04:33
Tom
The code or access to them?
04:33
For now I’ll probably just make a small discord server to post to
04:33
Tom
Advertising is advertising I guess
04:34
I like the name pump Papi
04:34
Steve
btw if anyone here has a milady nft i will give u free access + no fees on any trades
04:34
Tom
That’s pretty cool
04:35
This your first time developing btw? Or you got past experience?
04:35
Steve
nah im a software engineer
04:36
kad romnic
what’s your guys’ finalization and confirmation time using pump portal?
04:36
Tom
In that case it shouldn’t take you long to replace this api with something of your own 😉
04:39
Steve
hahah im mainly focusing on raydium pools rn
04:39
its good to have a pump integration with little effort tho
04:40
Im curious what the api dev uses for rpc on solana
04:41
Steve
personally i use helius
04:41
Idk whether to try and self host as well
04:41
Don’t want too much to mange tho
04:42
Steve
self hosting is a bad roi imo
04:42
u will never write better rpcs than a bunch of devs getting paid to optimise the shit out of it
04:49
Tom
Yea you are right
04:49
Maybe something further down the line
hΔrdshell invited hΔrdshell
05:32
Rose
Hey there hardshell, and welcome to PumpPortalAPI! How are you?
05:33
hΔrdshell
hey is there a way to log all transactions across the website?
05:34
Tom
Could just get it from the site itself I don’t think this api has transactions on all coins
05:34
hΔrdshell
is there an api again? i dont see
05:34
Tom
Well Ws and api
05:35
Tom
Was sending the link, sorry
05:35
hΔrdshell
i need an api to log all trades made across the site
05:35
Tom
Oh well you can grab that info from the site itself using websockets but depends how competent you are at programming
05:36
hΔrdshell
i see them but the endpoint is hidden
05:36
Tom
Yea, just look at initialisation and the behaviour between the site and ws server
05:37
Scroll all the way up